The robot corkscrews up a little to lift the pod. It charges after it completes a mission. It minimizes the traffic by traveling underneath the pods as much as possible, so fewer pods are on the "highway" at any given time. Katelyn Katelyn
it does a corkscrew motion to lift it after it puts the things back it goes to the charger and is one the charger for 5 minutes its programmed to go under the pods so the bots that have the pods on them can use the highway Nicholas Muhleman
The robot has a corkscrew function so that it can lift the pod off the ground, after its done with its task then it goes to one of the charging stations and takes a five minute "drink". To minimize traffic it tries to move underneath the shelving units when going to find whatever it needs. Colin
it has a corkscrew technique where it lifts up the shelf.
ReplyDeleteit knows when to charge after its job.
it minimizes traffic by going underneath shelves.
Sam Richards
it does a spinning motion, it program tells it when it needs to charge, it minimize traffic by using a highway to move around.
ReplyDeleteGarrett Coffin
It does a corkscrew motion. It charges once it finishes it's task. It minimizes traffic by using highway and street systems. Alex Haston
ReplyDeleteThe robot corkscrews up a little to lift the pod.
ReplyDeleteIt charges after it completes a mission.
It minimizes the traffic by traveling underneath the pods as much as possible, so fewer pods are on the "highway" at any given time.
Katelyn
Katelyn
it does a corkscrew motion to lift it
ReplyDeleteafter it puts the things back it goes to the charger and is one the charger for 5 minutes
its programmed to go under the pods so the bots that have the pods on them can use the highway
Nicholas Muhleman
1. It makes itself a little bit higher, to lift the shelf from the ground.
ReplyDelete2. After it completes its job.
3. It uses highway driving.
Brady Zheng
The robot has a corkscrew function so that it can lift the pod off the ground, after its done with its task then it goes to one of the charging stations and takes a five minute "drink". To minimize traffic it tries to move underneath the shelving units when going to find whatever it needs. Colin
ReplyDelete1 First they need to Identifying target pod and lifting the pod. 2 the program tell them to do . 3 by use the high way to move .
ReplyDeleteTaylor li
1. it make itself a little bit higher , to lift itself from the ground
ReplyDelete2.when finish it's job
3.It must drive on highway
---jerry sun